DATICS-IMECS'12

Workshop in the International MultiConference of Engineers and Computer Scientists 2012 (IMECS 2012)

The IMECS 2012 is organized by the International Association of Engineers (IAENG), a non-profit international association for the engineers and the computer scientists. The conference has the focus on the frontier topics in the theoretical and applied engineering and computer science subjects. The IMECS conferences serve as good platforms for our members and the entire engineering community to meet with each other and to exchange ideas. IMECS 2012 will take place in Hong Kong, 14-16 March, 2012.

URL: http://www.iaeng.org/IMECS2012

Aims and Scope of DATICS-IMECS’12 Workshop

DATICS Workshops were initially created by a network of researchers and engineers both from academia and industry in the areas of Design, Analysis and Tools for Integrated Circuits and Systems. Recently, DATICS has been extended to the fields of Communication, Computer Science, Software Engineering and Information Technology. The main target of DATICS-IMECS12 is to bring together software/hardware engineering researchers, computer scientists, practitioners and people from industry to exchange theories, ideas, techniques and experiences related to all aspects of DATICS.

Topics

Topics of interest include, but are not limited to, the following:

Circuits, Systems and Communications:

• Design, Simulation and Test of Digital, Analog, Mixed Mode and RF Circuits and Systems
• Processor Design and Embedded Systems
• VLSI, ASIC, FPGA, SoC and MPSoC
• Computer Aided Design and Electronic Design Automation
• Circuits and Systems for Communications
• Power Systems and Power Electronic Circuits
• Nonlinear Circuits and Systems
• Control Theory Topics in Circuits and Systems
• Signal Processing
• Circuits and Systems for Biomedical Applications
• Circuits and Systems for Energy Harvesting
• Circuits and Systems for Cryptography
• Circuits and Systems for Low Power Applications
• Computer Aided Verification
• Computer Aided Interconnect Analysis and Optimization
• Circuit/Device Modeling and Simulation
• Formal Modelling and Analysis of Circuits and Systems
• SystemC, SystemVerilog and Transcation Level Modelling
• Self-Correcting/Self-Healing Circuits and Systems
• Cyber-Physical Systems
• Battery Management Systems
• Photovoltaic System Design

Computer Science, Software Engineering and Information Technology:

• Formal Methods, Graph Theory, Process Algebras, Petri-Nets, Automaton Theory, BDDs and UML
• Equivalence Checking, Model Checking, SAT-based Methods, Compositional Methods and Probabilistic Methods
• Average-Case Analysis and Worst-Case Analysis
• Numerical Algorithms
• Software Developed to Solve Science
• Computational Biology and Bioinformatics
• Intelligent Systems
• Internet and Web Systems
• Real-Time, Hybrid, Embedded and Cyber-Physical Systems
• Agent and Autonomous Systems
• Scientific Computing and Applications
• Computer and Information Science
• Computer Networks and Data Communications
• Distributed Systems, Grid Computing and Services Computing
• Design and Programming Methodologies for Network Protocols and Applications
• Wireless Sensor Networks
• E-Business Design and Applications
• Financial Mathematics
• Computer-Aided Design and Manufacturing
• Computer Architecture
• Computer Control and Robotics
• Computer Graphics, Animation, and Virtual Reality
• Computers in Education and Learning Technologies
• Computer Modeling and Simulations
• Computer Security and Privacy
• Computer Vision and Pattern Recognition

General Chairs

• Ka Lok Man, Xi'an Jiaotong-Liverpool University (China) and Myongji University (South Korea)
• Chi-Un Lei, University of Hong Kong, Hong Kong (Link)
• Tomas Krilavičius, Vytautas Magnus University and Baltic Institute of Advanced Technology (BPTI), Lithuania

International Program Committee

• Vladimir Hahanov, Kharkov National University of Radio Electronics, Ukraine
• Paolo Prinetto, Politecnico di Torino, Italy
• Massimo Poncino, Politecnico di Torino, Italy
• Alberto Macii, Politecnico di Torino, Italy
• Joongho Choi, University of Seoul, South Korea
• Wei Li, Fudan University, China
• Michel Schellekens, University College Cork, Ireland
• Emanuel Popovici, University College Cork, Ireland
• Jong-Kug Seon, System LSI Lab., LS Industrial Systems R&D Center, South Korea
• Umberto Rossi, STMicroelectronics, Italy
• Franco Fummi, University of Verona, Italy
• Graziano Pravadelli, University of Verona, Italy
• Yui Fai Lam, Hong Kong University of Science and Technology, Hong Kong
• Vladimir PavLov, International Software and Productivity Engineering Institute, USA
• Ajay Patel, Intelligent Support Ltd, United Kingdom
• Jinfeng Huang, Philips & LiteOn Digital Solutions Netherlands, The Netherlands
• Thierry Vallee, Georgia Southern University, Statesboro, Georgia, USA
• Monica Donno, Minteos, Italy
• Jun-Dong Cho, Sung Kyun Kwan University, South Korea
• AHM Zahirul Alam, International Islamic University Malaysia, Malaysia
• Gregory Provan, University College Cork, Ireland
• Miroslav N. Velev, Aries Design Automation, USA
• M. Nasir Uddin, Lakehead University, Canada
• Dragan Bosnacki, Eindhoven University of Technology, The Netherlands
• Milan Pastrnak, Siemens IT Solutions and Services, Slovakia
• John Herbert, University College Cork, Ireland
• Zhe-Ming Lu, Sun Yat-Sen University, China
• Jeng-Shyang Pan, National Kaohsiung University of Applied Sciences, Taiwan
• Chin-Chen Chang, Feng Chia University, Taiwan
• Mong-Fong Horng, Shu-Te University, Taiwan
• Liang Chen, University of Northern British Columbia, Canada
• Chee-Peng Lim, University of Science Malaysia, Malaysia
• Salah Merniz, Mentouri University, Constantine, Algeria
• Oscar Valero, University of Balearic Islands, Spain
• Yang Yi, Sun Yat-Sen University, China
• Damien Woods, University of Seville, Spain
• Franck Vedrine, CEA LIST, France
• Bruno Monsuez, ENSTA, France
• Kang Yen, Florida International University, USA
• Takenobu Matsuura, Tokai University, Japan
• R. Timothy Edwards, MultiGiG, Inc., USA
• Olga Tveretina, Karlsruhe University, Germany
• Maria Helena Fino, Universidade Nova De Lisboa, Portugal
• Adrian Patrick ORiordan, University College Cork, Ireland
• Grzegorz Labiak, University of Zielona Gora, Poland
• Jian Chang, Texas Instruments, Inc, USA
• Yeh-Ching Chung, National Tsing-Hua University, Taiwan
• Anna Derezinska, Warsaw University of Technology, Poland
• Kyoung-Rok Cho, Chungbuk National University, South Korea
• Yuanyuan Zeng, Wuhan university, China
• D.P. Vasudevan, University College Cork, Ireland
• Arkadiusz Bukowiec, University of Zielona Gora, Poland
• Maziar Goudarzi, Sharif University of Technology, Iran
• Jin Song Dong, National University of Singapore, Singapore
• Dhamin Al-Khalili, Royal Military College of Canada, Canada
• Zainalabedin Navabi, University of Tehran, Iran
• Lyudmila Zinchenko, Bauman Moscow State Technical University, Russia
• Muhammad Almas Anjum, National University of Sciences and Technology (NUST), Pakistan
• Deepak Laxmi Narasimha, University of Malaya, Malaysia
• Danny Hughes, Xi'an Jiaotong-Liverpool University, China
• Jun Wang, Fujitsu Laboratories of America, Inc., USA
• A.P. Sathish Kumar, PSG Institute of Advanced Studies, India
• N. Jaisankar, VIT University. India
• Atif Mansoor, National University of Sciences and Technology (NUST), Pakistan
• Steven Hollands, Synopsys, Ireland
• Siamak Mohammadi, University of Tehran, Iran
• Felipe Klein, State University of Campinas (UNICAMP), Brazil
• Enggee Lim, Xi'an Jiaotong-Liverpool University, China
• Kevin Lee, Murdoch University, Australia
• Prabhat Mahanti, University of New Brunswick, Saint John, Canada
• Kaiyu Wan, Xi'an Jiaotong-Liverpool University, China
• Tammam Tillo, Xi'an Jiaotong-Liverpool University, China
• Yanyan Wu, Xi'an Jiaotong-Liverpool University, China
• Wen Chang Huang, Kun Shan University, Taiwan
• Masahiro Sasaki, The University of Tokyo, Japan
• Vineet Sahula, Malaviya National Institute of Technology, India
• D. Boolchandani, Malaviya National Institute of Technology, India
• Shishir K. Shandilya, NRI Institute of Information Science & Technology, India
• J.P.M. Voeten, Eindhoven University of Technology, The Netherlands
• Wichian Sittiprapaporn, Mahasarakham University, Thailand
• Aseem Gupta, Freescale Semiconductor Inc., Austin, TX, USA
• Kevin Marquet, Verimag Laboratory, France
• Matthieu Moy, Verimag Laboratory, France
• Ramy Iskander, LIP6 Laboratory, France
• Suryaprasad Jayadevappa, PES School of Engineering, India
• Shanmugasundaram Hariharan, Pavendar Bharathidasan College of Engineering and Technology, India
• Chung-Ho Chen, National Cheng-Kung University, Taiwan
• Kyung Ki Kim, Daegu University, Korea
• Shiho Kim, Chungbuk National University, Korea
• Hi Seok Kim, Cheongju University, Korea
• Nan Zhang, Xi'an Jiaotong-Liverpool University, China
• Brian Logan, University of Nottingham, UK
• Ben Kwang-Mong Sim, Gwangju Institute of Science & Technology, Korea
• Asoke Nath, St. Xavier's College (Autonomous), India
• Tharwon Arunuphaptrairong, Chulalongkorn University, Thailand
• Shin-Ya Takahasi, Fukuoka University, Japan
• Cheng C. Liu, University of Wisconsin at Stout, USA
• Farhan Siddiqui, Walden University, Minneapolis, USA
• Katsumi Wasaki, Shinshu University, Japan
• Pankaj Gupta, Microsoft Corporation, USA
• Taikyeong Jeong, Myongji University, South Korea
• Masoud Daneshtalab, University of Turku, Finland
• Amit Chaudhry, Technology Panjab University, India
• Bharat Bhushan Agarwal, I.F.T.M., University, India
• Abhilash Goyal, Oracle (SunMicrosystems), USA
• Yue Yang, EJITEC, China

International Reviewers

• Tom English, University College Cork, Ireland
• Miquel Moreto Planas, Technical University of Catalonia, Spain
• Chelho Chung, System Semiconductor/Central R&D Center, LS Industrial Systems, South Korea
• Sean Harte, Tyndall, University College Cork, Ireland
• Alexander Yin, University of Turku, Finland
• Luigi Giancardi, Devoteam auSystems SpA, Italy
• Alie El-Din Mady, University College Cork, Ireland
• Prasad D. Khandekar Vishwakarma Institute of Information Technology, Pune
• Hari Mohan Pandey, SVKM's NMIMS University, India
• Vishal Bharti, Dronacharya College of Engineering, Khentawas, Gurgaon, India
• Yiwang Wang, Suzhou Vocational University, China
• Chao Lu, Purdue University, USA
• Pavan Kumar Manchikalapudi, MNNIT, India
• Puneet Sareen, Texas Instruments, Germany
• Xiaoxun Li, Tsinghua University, China
• Ben L Zhou, Tabula, USA
• Razan Paul, Bangladesh University of Engineering and Technology, Bangladesh
• Nicolas Vallee, ENSTA, France
• Farakh Javid, LIP6 Laboratory, France
• Sushil Menon, PES School of Engineering, India
• Chi-Hua Chen, National Chiao Tung University, Taiwan
• Amir-Mohammad Rahmani, University of Turku, Finland

Organising Chairs

• Michele Mercaldi, EnvEve, Switzerland
• Jieming Ma, Xi'an Jiaotong-Liverpool University, China-UK

Paper Submissions, Proceedings, Indexing and Journal Publications

• All submitted papers should be in the form of .pdf and are to be limited to a maximum length of 6 pages (A4 size, single space, Times Roman of font size 10, two columns format), including figures, tables and references.
• There is no template for the initial paper.
• Please submit full papers using the EasyChair DATICS-IMECS'12 Webpage at http://www.easychair.org/conferences/?conf=daticsimecs12.
• If the paper(s) is/are accepted for publication, at least one of the authors of the accepted paper(s) must register to the DATICS-IMECS'12 Workshop through the hosting conference IMECS 2012. Details of the registration can be found at http://www.iaeng.org/IMECS2012/registration.html.
• Please note that the accepted papers in DATICS-IMECS’12 will be indexed in major database indexes so that it can be assess easily. After publication of the proceedings, print copies will be sent to databases like IET INSPEC, EBSCO, ISI Thomson Scientific, Engineering Index (EI),The Technology Research Databases (TRD) of CSA (Cambridge Scientific Abstracts), DBLP and Computer Science Bibliographies for indexing.
• Expanded and enhanced versions of accepted papers in DATICS-IMECS’12 can also be considered for inclusion in one of the IAENG journals (Link) or the IJDATICS journal (Link).
• Furthermore, revised and expanded version of the selected papers in DATICS-IMECS’12 may also be included as book chapters in the standalone editedbooks under the cooperation between IAENG and publishers like America Institute of Physics, the CPS of IEEE Computer Society, and Springer.

DATICS-IMECS’12 Review Process

DATICS-IMECS'12 consists of about 120 experts in the related fields of DATICS both from academia and industry. Each submission will be sent to at least 2 members of the DATICS IPC and additional reviewers for review.

Important Dates

• Deadline for full paper submission: 30 December 2011
• Notification of acceptance: TBD
• Deadline for authors' registration: 10 January 2012
• Deadline for final manuscript submission: 10 January 2012
• Conference Dates: 14-16 March 2012

Becoming a Sponsor of DATICS-IMECS’12

For information, please contact ss.datics@gmail.com.

Technical Committee and DATICS Group

If you are interested in joining the DATICS International Program Committee and Reviewers, please submit a brief CV by email to ss.datics@gmail.com.
You can also visit and join the DATICS Group:

Subscribe to DATICS

Email:

Visit this group

Enquiries

• Please direct all enquiries to ss.datics@gmail.com.